Taking care of your hearing aids

A simple cloth or tissue can be used to wipe down the hearing aids. A brush can be used to help remove more stubborn or stuck debris if necessary.

Refer to the User Guide that came with your hearing aid for more details. Gently clean your hearing aid with a soft, dry towel. Alcohol, solvents or cleaning products cause damage.

If you need immediate assistance, you can call us at 0800 522 422.

Cleaning your hearing aids more frequently will help keep them in the best condition possible. Generally a good practice is cleaning them once every morning before you put them on.

It varies depending on how much wax your ear produces. Estimates range from once per week, to once every few months. Inspect the wax filter frequently, and change when wax or other debris becomes noticeable.

Use a thin wire or the cleaning brush that comes with your hearing aid to clear the vent. If using a thin wire, insert it into one end, and push it through until it comes out the other end. Be sure to wipe off any debris with a cloth or tissue before removing the wire from the vent.

Always separate the earpiece from the hearing aid before cleaning it. The hearing aid should never come into contact with water! When you connect the earpiece to your hearing aid, it has to be absolutely dry.

It is best to dry the tube with a puff of air using an air puffer (do not blow air through the tube from your mouth). You can get this inexpensive accessory from your local bloom™ hearing specialists store.